Step 1: Set Static IP for the Management computer
Step 2: Web Page Configuration Guide
Step 1 and Step 2 please refer to the User Manual.
Step 3: Port setting
For example, to set the port 1 to 10Mbps, please follow these steps:
3.1 Highlight port 1 (or click on the box in front of the port 1) in the range of ports;
3.2 Click the port speed drop-down menu to select 10Mbps;
3.3 Click OK; the Refresh.
If success, the Port rate(speed/duplex) of Port1 should be 10M/Auto as below: