Reduce complexity with one cable for connectivity and power, UTEPO UTP7108E-POE provides 8*10/100Mbps PoE ports to connect to PoE/Non-PoE devices, with a max 30W PoE power output. And it also supports a wide temperature range (-22℉~149℉/-30℃~65℃) design based on high-performance access to ensure stable data uploads, CCTV mode to enable VLAN and long-distance transmission, and PoE watchdog function.
>>DetailsSHENZHEN, China /April 10, 2019 UTEPO, a world-pioneering industrial IoT transmission product and solution provider, was sharing the latest PoE technology with the guests during the International Security Conference and Expo (ISC West) at booth #40736 from April 10th to 12th, covering everything from video surveillance, access control, biometrics, smart home, public security, drones & robotics and more.
>>DetailsUTP1218-PSB150 provides 16 100M Ethernet RJ-45 downlink ports and 2 Gigabit Ethernet RJ-45 uplink ports. All RJ-45 downlink Ethernet ports support Power-over-Ethernet (PoE+) and deliver up to 30W power per port. The switch supports 3 working modes through DIP switch: Default, VLAN and CCTV. It can be widely used in video security monitoring systems, network projects, etc.
>>DetailsWhen implementing QoS tools and strategies, organizations should follow these steps: PLANNING, DESIGN, TESTING, DEPLOYMENT, MONITORING AND ANALYSIS. Click to know more.
>>DetailsUTP5328S-PSD2000 provides 24 Gigabit downlink RJ-45 Ethernet ports and 4 Gigabit uplink SFP ports. All downlink RJ45 Ethernet ports support PoE++ and deliver up to 90W power per port, complying with IEEE 802.3bt, with a total PoE power budget up to 1900W. UTP5328S-PSD2000, with dual modular power supply slots expandability, supports AC and DC power module redundancy. Also, it has extensive L2+ management functions with routing features such as RIP, OSPF, etc., and can be easily managed via a WEB GUI (HTTP/HTTPS), CLI (telnet/ssh/console), or SNMP.
>>Details+86-755-83898016-863
+86-1501-2669-765
info@utepo.net
Note: To speed up our service to you, please make sure the field with " * " mark is filled before you click on "Submit" button, Thank you!