Home News & Events Product News
UTEPO Category 6 Cable

UTEPO Category 6 Cable

Category 6 Category 6a

>>Details
UTEPO Category 5 Cable

UTEPO Category 5 Cable

Category 5 cable (Cat 5) is a twisted pair cable for carrying signals. This type of cable is used in structured cabling for computer networks such as Ethernet. It is also used to carry other signals such as telephony and video. The cable is commonly connected using punch down blocks and modular connectors. Most Category 5 cables are unshielded, relying on the twisted pair design and differential signaling for noise rejection. Category 5 has been superseded by the Category 5e (enhanced) specification.

>>Details
UTEPO Twisted Pair

UTEPO Twisted Pair

Twisted pair cabling is a type of wiring in which two conductors (the forward and return conductors of a single circuit) are twisted together for the purposes of canceling out electromagnetic interference (EMI) from external sou

>>Details
Ethernet Over Coax

Ethernet Over Coax

Ethernet over Coax (EoC) is a family of technologies that supports the transmission of Ethernet frames over coaxial cable.

>>Details
Power over Ethernet

Power over Ethernet

Power over Ethernet or PoE technology describes a system to pass electrical power safely, along with data, on Ethernet cabling. The IEEE standard for PoE requires category 5 cable or higher for high power levels, but can operate with category 3 cable if less power is required. Power is supplied in common mode over two or more of the differential pairs of wires found in the Ethernet cables and comes from a power supply within a PoE-enabled networking device such as an Ethernet switch or can be injected into a cable run with a midspan power supply.

>>Details
info@utepo.net

+86-755-83898016-863

Shenzhen brand website construction:Ctmon